Need help?Do you have a question about the Beta Motorcycles RR 200 2T MY 2019 and is the answer not in the manual?
General| Engine Type | Single cylinder, 2-stroke |
|---|---|
| Displacement | 190.2 cc |
| Lubrication | Premix |
| Transmission | 6-speed |
| Clutch | Wet multi-disc |
| Final Drive | Chain |
| Front Tire | 90/90 - 21 |
| Rear Tire | 120/90 - 18 |
| Fuel System | Keihin PWK 36 |
| Frame | Molybdenum steel with double cradle split above the exhaust port |
| Front Suspension | 48 mm Sachs USD fork, adjustable |
| Rear Suspension | Sachs shock, adjustable |
| Front Brake | 260 mm disc, 2-piston caliper |
| Fuel Capacity | 9.5 liters |
| Cooling System | Liquid-cooled |
| Bore x Stroke | 62 mm x 63 mm |
Covers hazards from carbon monoxide, engine oil, coolant, and hot parts.
Step-by-step instructions for removing engine top-end components.
Detailing the removal of flywheel, stator, and pick-up unit.
Steps to remove various engine components like pumps and clutch.
Procedures for accessing and disassembling the crankshaft and gearbox.
Procedures for checking and assembling crankcase halves.
Steps for checking the condition of the connecting rod and engine shaft.
Instructions for checking and reassembling the gearbox unit.
Checks and assembly of the primary gear and clutch unit components.
Checks for piston, elastic bands, cylinder, and exhaust valve components.
Maintenance intervals based on operating hours for various engine components.
Lists recommended products and quantities for gearbox, coolant, fuel, etc.
To Next Page
