Beta Three T-2000 - Introduction; Technical Parameters

Stereo(W/Ch)
300W/8ohm
450W/4ohm
400W/8ohm
600W/4ohm
550W/8ohm
900W/4ohm
Bridged-Mono
1000W/8ohm
1200W/4ohm
1200W/8ohm
1400W/4ohm
1800W/8ohm
2000W/4ohm
Output power:
TECHNICAL PARAMETERS
Introduction
Frequency
Phase Response: +/-5 degree from 20Hz-50KHz.
Signal to noise ratio: 105dB(A-weighted)at full output and 28 dB GAIN.
Total harmonic distortion(THD): <0.03% from 20Hz-50KHz to 1KHz increasing linearly to 0.1% at 50KHz.
Intermodulation distortion(IMD): <0.03% from 10mW to 300W,400W,550W,1000W at 28dB gain.
Slew Rate: >26V per microsecond.
Damping factor: >200 from 20Hz-400Hz.
Load impedance: ratied for 16,8,4,2ohm use. Safe with all types of loads,even reactive ones.
Required AC mains: 50Hz,220V-240V.
AC line connector: standard three-wire grounded connector.
L*W*H: 485mm*445mm*130mm
Response: 20Hz-50KHz(+/-0.1).
Weigher:
T-1000:
T-2000:
T-3000:
Kg
Kg
Kg
20
26
27
T-1000:
T-2000:
T-3000:
HIGH PERFORMANCE POWER AMPLIFIERS
3