Need help?Do you have a question about the Beta Three T-2000 and is the answer not in the manual?
Detailed technical specifications for amplifier models T-1000, T-2000, and T-3000.
Guidance on connecting the amplifier to the mains power socket, including voltage checks and cable safety.
Recommended sequence for powering the amplifier on and off within an audio system to avoid peaks.
Information on ensuring adequate airflow for the amplifier's cooling system and avoiding blockages.
Precautions against environmental factors and instructions for handling breakdowns, advising professional service.
Information on connecting loudspeakers to the amplifier's A, B, and BRIDGED outputs.
General| Weight | 13.8kg |
|---|---|
| Input Impedance | 20k ohms |
| Protection | DC, short circuit |
| Cooling | Fan-cooled |
| Power Supply | AC 220V, 50/60Hz |
| Dimensions (W x H x D) | 483 x 88 mm |
| Output Power (8 ohms) | 2 x 200W RMS |
| Output Power (4 ohms) | 2 x 300W RMS |
| Power Output | 200W @ 8 ohms, 300W @ 4 ohms |
To Next Page
