Beta D3000 - Potentiometer Programming

Potentiometer
Programming
• Use the switch to
select COND for probe
mode, or TIME for
probeless mode
•Turn the knobs to
determine settings as
noted below
Knob
Conductivity Mode Time Mode
DETERGENT
SETPOINT
Concentration Set Point
0-70 Beta Units
Detergent Recharge
0-30 Seconds at 99%
speed
RINSE
SETTING
Rinse Speed
0-99% while trigger is on
Rinse Run Time
0-30 sec
DET INITIAL
CHARGE
Detergent Initial Charge
0-90 seconds