BRAKE ADJUSTMENT
Front brake
The front brake is disc type with hydraulic
control, and for this reason it requires only
ordinary maintenance. If you wish to adjust
the position of the lever, use adjuster screw
A. It is advisable to leave a minimum of
play.
Rear brake
The rear brake is disc type with hydraulic
control.
You can adjust the pedal height using adju-
sters B and C.
We recommend that you leave a minimum
of free clearance.
CLUTCH ADJUSTMENT
The only adjustment that can be made on
the clutch adjusting the position of the
clutch lever E.
To make this adjustment, use adjuster D.
D
E
A
C
B
To Next Page
Loading...
