To Next PageTo Next Page
Need help?Do you have a question about the Beta Evo4t 300 and is the answer not in the manual?
General| Fuel System | Carburetor |
|---|---|
| Transmission | 6-speed |
| Front Suspension | Hydraulic fork with adjustable compression and rebound damping |
| Cooling System | Liquid |
| Frame | Aluminum |
| Seat Height | 660 mm |
| Fuel Capacity | 2.5 liters |
| Cooling | Liquid-cooled |
| Brakes | Front and rear disc brakes |
| Engine Type | 2-stroke |
| Front Brake | Disc brake |
| Rear Brake | Disc |
| Engine | Single cylinder, 2-stroke |
| Rear Suspension | Monoshock |
| Starter | Kickstart |
| Clutch | Wet multi-disc |
Identifies main parts, console, and controls.
Locates frame/engine IDs and lists technical specifications.
Provides the motorcycle's electrical wiring schematics.
Instructions for refueling and starting the engine.
Guidance on initial use and maintenance checks.
Lists specific oils, fluids, and grease for maintenance.
Covers lubrication circuit, checking and changing engine oil.
Includes fluid checks, bleeding, and pad replacement.
Covers fork oil, spark plug, air filter, brakes, coolant, suspension linkage.
Outlines routine maintenance tasks and intervals.
Adjusting brake levers/pedals and clutch lever position.
Carburettor, throttle, and steering head clearance.
Adjusting chain tension and suspension spring preload/compression.
