Need help?Do you have a question about the Beta 250-300 RR and is the answer not in the manual?
General| Brand | Beta |
|---|---|
| Model | 250-300 RR |
| Category | Motorcycle |
| Language | English |
Remove all protective materials, packaging, and items from the motorcycle crate.
Mount handlebars using supplied 8mm bolts and upper clamp bracket, torquing to 25 Nm.
Carefully cut tie straps securing the motorcycle to the crate, ensuring it remains stable.
Connect electricals and mount the headlight mask to the front fender brace.
Feed the front brake line and speedometer wire through the headlight mask grommet.
Enlarge skid plate holes, install spacers, and attach with clips and bolts.
Fit frame guards with zipties and a bolt into the swingarm pivot.
Apply grease to the air filter's inner edge and ensure it is installed securely.
Prepare the battery by filling, sealing, and charging, then install it.
Review checklist for pre-delivery inspection and complete setup.
To Next Page
