1) Remove card board
from crate. Remove bag
with bolts and upper
handle bar clamp taped
to the protective
covering over the seat.
Remove all items from
bottom of crate.
2) ) Remove wood
support from lower bar
mount and discard.
Retain bolts for handle
bar. Remove protective
covering from motorcycle
and handle bar.
3) Install handle bars
using the supplied
8mm bolts and upper
clamp bracket. Torque
bolts to 25 nm.
4) Remove additional items
from the box supplied. Item
list is as follows:
-Headlight assembly
-Skid plate
-Frame guards
-Tool kit
-Battery Strap
-Owners manual
--Hardware Cut Large Tie-
Straps from front and rear
wheels.
5) Carefully remove Tie-
Straps from front and rear
wheels making sure the
motorcycle doesn’t fall over.
Remove the motorcycle from
the crate.
6) Cut large tie straps form
foot rests
To Next Page
