To Next PageTo Next PageWhy does my Beta RR 125 engine overheat and lose power?
If your Beta Motorcycle engine overheats and loses power, several factors could be responsible. One potential cause is a lean fuel mixture, which may be due to a partially blocked jet. Additionally, a partially obstructed exhaust pipe can lead to overheating and power loss. Finally, delayed ignition can cause overheating and power loss; for this, it is best to consult with our dealer.
How to fix a Beta RR 125 Motorcycle engine that misfires?
If the Beta Motorcycle engine misfires, it might be due to a spark plug with an irregular electrode gap. You should restore the correct distance. Another possible cause is a dirty spark plug, in which case you should clean or replace it.
What to do if the piston knocks in my Beta RR 125 Motorcycle?
If your Beta Motorcycle piston knocks, it could be due to over-advanced ignition timing. In this case, you should check the timing. Another potential cause is carbon deposit buildup inside the cylinder or on the spark plug. For this, it is best to consult with our dealer.
General| Displacement | 124.8 cc |
|---|---|
| Cooling System | Liquid cooled |
| Compression Ratio | 12.5:1 |
| Fuel System | Electronic fuel injection |
| Ignition | Electronic |
| Transmission | 6-speed |
| Front Tire | 90/90-21 |
| Lubrication | Wet sump |
| Clutch | Wet multi-disc |
| Final Drive | Chain |
| Front Suspension | 41 mm upside-down fork |
| Rear Suspension | Monoshock |
| Front Brake | 260 mm disc |
| Rear Brake | 220 mm disc |
Details procedures for operating and using the vehicle.
Covers routine maintenance tasks and checks for optimal vehicle performance.
Guidance on adjusting various vehicle components for optimal performance.
Instructions for replacing common parts like bulbs and indicators.
Troubleshooting common problems and emergency procedures.
Identifies the main components of the motorcycle.
Details on locating frame and engine identification codes.
Explanation of controls located on the handlebars, including levers and buttons.
Describes the function and display of the LCD screen, including icons and pages.
Details the function of the ignition switch for starting the vehicle.
Instructions on how to engage and disengage the steering lock.
Provides specifications for vehicle weight and dimensions.
Schematic representation of the vehicle's electrical system.
Details on electrical components, focusing on the battery.
Chart detailing recommended lubricants and liquids for optimal performance.
Essential checks and maintenance to perform before and after vehicle use.
Procedure for safely refueling the fuel tank, noting capacity and reserve.
Recommendations for the initial 500 km break-in period for engine and parts.
Detailed steps for starting the engine, including electric and kick start methods.
Important considerations for parking on the sidestand and its safety features.
Procedure for checking and changing the engine oil.
Instructions for checking and topping up front brake fluid.
Procedure for accessing the air filter by removing the passenger seat.
Guidance on checking spark plug condition, gap, and replacement.
Procedure for checking front brake pad wear.
Procedure for checking rear brake pad wear.
Steps for removing the exhaust silencer, including panel removal.
Instructions for removing various plastic body panels.
Procedure for removing the fuel tank.
Table outlining scheduled maintenance tasks and intervals.
Details on adjusting the front and rear brake systems.
Procedure for adjusting the clutch lever position and idle stroke.
How to correctly adjust the engine's idle speed.
Procedure for adjusting the fuel flow using the carburetor.
How to adjust the throttle cable play.
Procedure for checking and adjusting steering play.
Procedure for checking and adjusting drive chain tension and alignment.
How to adjust the rear shock absorber spring preload.
Procedure for manually adjusting the headlight beam alignment.
Detailed steps for replacing front headlight and parking light bulbs.
Procedure for replacing the rear light and brake light bulbs.
Instructions for replacing front and rear turn signal indicators.
Identifies common engine starting issues and their solutions.
Addresses engine misfires, piston knocks, and overheating issues.
Troubleshooting weak front and rear brake performance.
