Beta RR 125 series User Manual

47
3
MAINTENANCE AND CHECKS
MANUTENZIONE E CONTROLLI
SMONTAGGIO MARMITTA
Per smontare la marmitta occorre
rimuovere la fiancata posteriore si-
nistra (vedi
Rimozione delle plasti-
che
a pag. 48).
A questo punto rimuovere la vite B
che fissa la marmitta al telaio allen-
tare la fascetta C di collegamento
al tubo di scarico dopodichè sfilare
la marmitta.
C
B
REMOVING THE SILENCER
To remove the silencer, first take
down the left-hand rear side panel
(see
Removing the plastics on page
48).
Then remove screw B fixing the si-
lencer to the frame, loosen clamp C
connecting the silencer to the ex-
haust pipe and finally remove the
silencer.

Beta RR 125 series Specifications

General

Displacement	124.8 cc
Cooling System	Liquid cooled
Compression Ratio	12.5:1
Fuel System	Electronic fuel injection
Ignition	Electronic
Transmission	6-speed
Front Tire	90/90-21
Lubrication	Wet sump
Clutch	Wet multi-disc
Final Drive	Chain
Front Suspension	41 mm upside-down fork
Rear Suspension	Monoshock
Front Brake	260 mm disc
Rear Brake	220 mm disc