1
2
3
5
4
MAIN PARTS
1 - Filter box 2 - Fuel tank 3 - Fuel filler cap
4 - Silencer 5 - Kickstart lever
A
B
1
4
2
3
VEHICLE IDENTIFICATION DETAILS
Frame identification.
The frame identification details (A) are
stamped on the right-hand side of
the headstock.
ENGINE IDENTIFICATION DETAILS
Engine identification data B is stamped in
the area shown in the figure. In order to
read it correctly, it is necessary to remove
the silencer and disconnect the regulator
connector.
CONSOLE AND CONTROLS
1 Clutch lever
2 Front brake lever
3 Throttle twistgrip
4 Hot start lever
To Next Page
Loading...
Need help?
General
