Need help?Do you have a question about the Betafence Robusta and is the answer not in the manual?
General| Power Supply | 230 VAC |
|---|---|
| Protection Class | IP44 |
| Motor Type | 24 VDC |
| Opening Speed | 12 seconds |
| Closing Speed | 12 seconds |
Diagram showing dimensions and anchor points for gates opening to the right.
Diagram showing dimensions and anchor points for gates opening to the left.
Lists chemical anchors and quantities needed for securing gate posts and support rollers.
Step-by-step guide for marking and drilling holes for ground anchors based on templates.
Instructions for leveling adjustment nuts on ground anchors for precise post positioning.
Details on adjusting the front mechanical buffer for gate opening limits.
Details on adjusting the rear mechanical buffer for gate closing limits.
Checks for induction system jumpers and controller parameters for proper function.
Verifying correct operation and controller indications for safety strips on the gate.
Verifying the functionality of inductive end switches and their controller indications.
Step-by-step guide for aligning photocells for safety and proper gate function.
To Next Page
