BETAFPV Cetus X - Page 31

The green LED light is the receiver status light. ts codes are as follows:
Status
Flashing
Solid On
State description
Normal, able to arm
Error, unable to arm
Armed
Solution
Throttle stick at lowest
7.2 Remote Control Radio Transmitter LED Light & Beep
Status Codes
There is a blue & red LED indicator light around the power button which indicates the
status of the remote control radio transmitter.
Indicator LED color
Red
Red
Red
Status
Solid
Flashing fast
Flashing
slowly
State description
Throttle joystick is not
at the lowest position
when starting
Remote control radio
transmitter is in
binding mode
Battery voltage is too
low
29
Solution
Move throttle joystick
to the lowest position
Wait for binding
Charge remote control
radio transmitter