7. LED Light I Beep Status Codes
7.1 Quadcopter LED Light
There is a blue LED light and a green LED light on the flight controller. It is used to
indicate whether the quadcopter is powered on normally and various status of the
quadcopter
000
Button
Blue LED (Reverse Side)
Green LED (Reverse Side)
00 0
The green LED light is the receiver status light. Its codes are as follows:
Status
Flashing slowly
Flashing fast
Solid
State description
Remote control radio
transmitter's receiver not
connected
Quadcopter is in binding
mode
The quadcopter is
connected with the remote
control radio transmitter
28
Solution
Open remote control radio
transmitter connection
Press the BIND button on
the remote control radio
To Next Page
Loading...
