Button
Blue LED (Reverse Side)
Green LED (Reverse Side)
000
• Step 3: Press switch SA to arm the quadcopter. The throttle joystick must be at the
lowest position or the quadcopter will not be armed. After being armed, the motors will
spin slowly. Pressing SA again and making it push up will help disarm the quadcopter
and motors
o
vs
o
Press the Switch SA to Arm the Quadcopter
Complete above three steps to ensure that the quadcopter and the remote control radio
transmitter can work normally. Then, the fol owing flight operations can be continued
To Next Page
Loading...
