Note: The RGB LED will NOT change according to the output power. When the
output power is 250mW or above, the fan will spin automatically. The Micro RF
TX module does NOT suppo 1W or 2W output. When switch to this value, the
system will move to 500mW automatically.
As ExpressLRS project is still in frequently update, please check
BETAFPV Suppo (Technical Suppo -> ExpressLRS Radio Link)
for more details and newest maunal.
https://suppo.betafpv.com/hc/en-us
● Newest user manual;
● How to upgrade the rmware;
● FAQ and troubleshooting.
More Information
To Previous Page
Loading...