Do you have a question about the BETOPPER LPC015 and is the answer not in the manual?
Please read each item of this manual carefully before installing and using this equipment.
It is forbidden to spread the contents of this manual without permission.
This manual is for informational purposes only, and all contents are subject to change without notice.
Unless instructions are stated, please do not modify the device at will.
Disconnect power before installation/repair and ensure good ventilation around the luminaire.
This luminaire is designed for indoor demonstration. Do not use for extended periods in humid environments.
Avoid contact with water droplets. Take adequate waterproof measures if used outdoors.
Personnel must be familiar with performance before operation; misoperation causes most damage.
Do not face the illuminator directly for extended periods to avoid eye discomfort.
Always wipe the fixture with a clean cloth.
Red, green, blue three-in-one full color. Supports jumps, pulse, gradient, strobe, voice control, self-propelled modes.
LPC015/LPC008N. Supports RDM function.
| Brand | BETOPPER |
|---|---|
| Model | LPC015 |
| Type | LED Par Light |
| Light Color | RGBW |
| Voltage | AC 100-240V, 50/60Hz |
| Beam Angle | 25° |
| Material | Aluminum alloy |
| Lifespan | 50, 000 hours |
| Certification | CE, RoHS |
| Control Mode | DMX512, Auto, Sound, Master/Slave |
Loading...