ref. #16740 to allow the mounting and the use of a DIN
regulator on a standard K-valve cylinder.
2 - NITROX USE
• The use of NITROX regulator requests a specific
“NITROX Diver” training.
• NITROX regulator must be fitted on NITROX tank with
M26x2 connexion (EN144-3 Standard).
• Check the pourcentage value of your NITROX mix and
conduct your dive with its max depth restriction.
• The BEUCHAT NITROX regulators are compatible with
Oxygen 100% (i.e. for 3m and 6m deco stops use).
• NITROX markings and colors (Yellow and Green) are
specific identifying elements of a NITROX regulator.
• Have an annual maintenance session for your NITROX
regulator by a NITROX certified BEUCHAT dealer.
• Only use BEUCHAT NITROX spare parts for the mainte-
nance of NITROX regulator.
• Always protect your NITROX regulator first stage with
the attached special plug to prevent any contamination
(grease, particules, dust, ...).
VS3 - VS3 Octopus - VS3 NITROX / User guide > 37
Notice Detendeurs 07-2008 int.qxd 31/07/08 15:46 Page 37
To Next Page
Loading...
