How to fix Beurer Medical Equipment when it does not switch on?
If your Beurer Medical Equipment device doesn't switch on, it might be due to empty batteries. Try replacing the batteries. Alternatively, the batteries may not be correctly inserted, so try reinserting them.
Why is the stimulation on my Beurer Medical Equipment device uncomfortable?
If you find the stimulation from your Beurer Medical Equipment device uncomfortable, it could be due to several reasons. The intensity might be set too high; try lowering it. Also, the water contact electrodes may not be sufficiently moist, so switch off the device and moisten the electrodes. A worn or faulty connection cable can also cause discomfort, so consider replacing it. Lastly, worn or faulty water contact electrodes might be the issue, so replace the universal cuff.
What to do if stimulation stops during use of Beurer Medical Equipment?
If the stimulation stops during use of your Beurer Medical Equipment, it could be because the universal cuff has worked itself loose from the skin. Stop the application and reposition the universal cuff. Another reason could be that the connection cable has worked itself loose, so stop the application and reinsert the connection cable. Finally, the batteries might be empty, so replace the batteries on the control unit.
Why is the stimulation too weak on my Beurer Medical Equipment?
If the stimulation from your Beurer Medical Equipment is too weak, it could be because the universal cuff is not in sufficient contact with the skin. Replace the universal cuff and ensure there is sufficient contact with the skin. Another possibility is that the water contact electrodes are not sufficiently moist. In this case, switch off the device and moisten the electrodes.
What to do if skin turns red using Beurer Medical Equipment?
If your skin turns red or you experience a stabbing pain while using the Beurer Medical Equipment, it could be due to several reasons. The universal cuff may not be positioned correctly on the skin; ensure that it sits securely and cannot move. The universal cuff could also be dirty; clean it as described in the instructions for use. Another cause might be a scratch on one of the water contact electrodes, in which case you should replace the universal cuff. Insufficiently moist water contact electrodes could also be the problem; switch off the device and moisten the electrodes.
Why is the stimulation irregular on my Beurer Medical Equipment?
If you are experiencing irregular stimulation with your Beurer Medical Equipment, the connection cable may be faulty. Try reducing the intensity and rotating the connection cable on the socket by 90°. If additional power failures occur, replace the connection cable.
Why is stimulation ineffective on my Beurer Medical Equipment?
If the stimulation from your Beurer Medical Equipment is ineffective, it may be because the water contact electrodes are not positioned correctly on the skin. Remove the water contact electrodes and reposition them on the skin, ensuring sufficient contact.
Lists the items included with the knee and elbow TENS device.
Covers general safety guidelines for using the TENS device.
Details crucial precautions, warnings, and situations where the device should not be used.
Provides an overview of the control unit and its components.
Step-by-step guide for inserting batteries into the device.
Instructions on connecting the cable and positioning the universal cuff.
Instructions on how to choose between different operational programs.
Guidance on adjusting the stimulation intensity levels.
How to lock the controls to prevent accidental changes during operation.
Instructions for cleaning the main control unit safely.
Instructions for cleaning the universal cuff safely.
General| Brand | Beuer |
|---|---|
| Model | EM 29 |
| Category | Medical Equipment |
| Language | English |
To Next Page