Beuer EM 29 - Initial use; Inserting the batteries

To Next Page

To Previous Page

No. Designation

1 On/O/Pause button

2 Intensity setting

▲ Increase

▼ Lower

3 Program/lock button

4 Battery compartment

5 Connector socket

6 Screen with LCD display

7 Battery status, appears when batteries are dead

8 Intensity, level 0 – 20

9 Pause symbol, ﬂashes when activated

10 TIMER: Remaining time in the active program in

minutes

11 Button lock active

12 Active program

5. Initial use

Inserting the batteries

Open the battery compartment [4]

by pushing the cover in the area

marked with an arrow and sliding

downwards.

Insert the three alkaline AAA 1.5 V

batteries. When inserting the batte-

ries, ensure that the correct polarity

is observed.

Then close the battery compartment

lid until you hear and feel it click into

place.

Connecting the connection

cable and positioning the uni-

versal cu

Connect the connection cable

with the metallic connection clips

on the universal cu.

Note

You can position the universal cu on either your knee

or elbow.

Before positioning the universal cu, ﬁrst clean the

body parts to be treated.