Beurer BC 30 User Manual

20
7. Measuring Blood Pressure
Ensure the device is at room temperature
before measuring. The measurement can be
performed on the left or right wrist.
Attach the cuff
• Expose your wrist. Ensure that the circula-
tion of the arm is not hindered by tight cloth-
ing or similar. Place the cuff on the inside of
your wrist.
• Fasten the cuff with the hook and loop fas-
tener so that the upper edge of the monitor
is positioned approx. 0.4 in (1 cm) below the
ball of your thumb.
• The cuff must be fitted tightly around the
wrist, but must not constrict.
Blood pressure may vary between the right and
left wrist, which may mean that the measured
blood pressure values are different. Always
perform the measurement on the same wrist.
If the values between the two wrists are sig-
nificantly different, please consult your doctor
to determine which wrist should be used for
the measurement.
1 2 3
1 cm (0.4 in)

Beurer BC 30 Specifications

General

Measurement Method	Oscillometric
Display Type	LCD
Memory Function	Yes
Number of Memory Slots	60
Cuff Size	22 - 32 cm
Power Supply	4 x 1.5V AAA batteries
Automatic Switch Off	Yes
Dimensions	10.6 x 14.4 x 5.0 cm
Type	Upper arm blood pressure monitor
Measurement location	Upper arm
Arrhythmia detection	Yes
WHO classification	Yes
Measurement Range (pressure)	0 - 300 mmHg
Accuracy (pressure)	±3 mmHg
Measurement Range (pulse)	40-199 bpm
Accuracy (pulse)	±5% of the reading