How to fix Beurer BF 54 Scales when maximum load-bearing capacity exceeded?
The Beurer Scales show 'maximum load-bearing capacity exceeded' when the weight on the scale is more than 330 lb (150 kg, 24 st). Only weigh the maximum permissible weight.
What to do if Beurer Scales show low power error?
If your Beurer Scales display a low power error message, it means the battery is low. You should change the battery to resolve this issue.
What to do if Beurer BF 54 give unrealistic results?
If your Beurer Scales are providing unrealistic results, wait until the scale switches off automatically, then repeat the measurement. Ensure the scale is placed on a level floor, not carpet. Also, remain still during the weighing process.
What to do if Beurer BF 54 say body fat measurement is outside measurable range?
If your Beurer Scales indicate that your body fat measurement is outside the measurable range (less than 3% or greater than 55%), repeat the weighing process barefoot. If necessary, slightly moisten the soles of your feet.
What to do if Beurer Scales say water percentage measurement is outside measurable range?
If your Beurer Scales show that your percentage of water lies outside the measurable range (less than 25% or greater than 75%), repeat the weighing barefoot and slightly moisten the soles of your feet if necessary.
Why do Beurer BF 54 Scales show high electrical resistance between electrodes and feet?
The Beurer Scales may show a high electrical resistance between the electrodes and your feet because of high electrical resistance between the electrodes and the soles of your feet (for example, heavily calloused skin). To resolve this, repeat the weighing barefoot, slightly moisten the soles of your feet if necessary, and remove any calluses on the soles of your feet.
Explains warning, caution, and notice symbols used in the manual.
Critical warnings on medical devices, pregnancy, children, and battery handling.
Details how to replace batteries and store the unit.
Lists crucial warnings before starting scale operation.
Instructions for taking a simple weight measurement.
Lists common error messages and their solutions.
General| Measurement Method | Bioelectrical impedance analysis (BIA) |
|---|---|
| Maximum weight capacity | 180 kg |
| Weight increments | 100 g |
| Body fat analysis | Yes |
| Body water percentage | Yes |
| Muscle mass analysis | Yes |
| Bone mass analysis | Yes |
| Body Mass Index (BMI) measurement | Yes |
| Memory function | Yes |
| Number of users | 8 |
| Display type | LCD |
| Easy to clean | Yes |
| Overload indicator | Yes |
| Shape | Square |
| Auto power off | Yes |
| Batteries required | Yes |
| Battery type | AAA |
| Number of batteries supported | 4 |
| Power supply | Battery |
| Low battery indicator | Yes |
| Dimensions | 30 x 30 x 2.5 cm |
| Type | Electronic |
| Product type | Digital Scale |
To Next Page
