31
•
For environmental reasons, do not dispose of the
device in household waste at the end of its service life.
Dispose of the device at a suitable local collection or
recycling point in your country. Dispose of the device in
accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.
Disposing of the batteries
•
The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
•
The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
12. Technical Specifications
Model no. BM 35
Type: BM 35/1
Measurement
method
Oscillometric, non-invasive blood pres-
sure measurement on the upper arm
Measurement range Cuff pressure 0 – 300 mmHg,
systolic 60 – 280 mmHg,
diastolic 30 – 200 mmHg,
Pulse 40 – 199 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement
inaccuracy
Max. permissible standard deviation
according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 135 mm x W 105 mm x H 53 mm
Weight Approx. 327 g (without batteries)
Cuff size 22 to 36 cm
Permissible operating
conditions
+10 °C to +40 °C, 15-90 % relative air
humidity (non-condensing)
Permissible storage
conditions
-25 °C to +70 °C, ≤ 93 % relative air
humidity, 860 –1060 hPa ambient
pressure
Power supply
4 x 1,5 V
AAA batteries
Battery life For approx. 250 measurements,
depending on the blood pressure level
and/or pump pressure
Classification Internal supply, IPX0, no AP or APG,
continuous operation, type BF applied
part
The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notification
to allow for updates.
To Next Page
Loading...
