Beurer BR 90 - Device Not Heating; Application Start Issues

38
Problem Possible cause Solution
The device no longer
gets hot enough.
The battery level is
too low.
Replace both batteries
as described in these
instructions for use.
Device outputs
3acoustic signals/
thedevice status
LED
6
flashes –
even after switching
the device OFF and
ON again.
Battery level is too
low, meaning that
the device may no
longer be able to be
operated.
Replace both batteries
as described in these
instructions for use.
Application cannot
be started, even
though the ON/OFF
switch
2
is set
to ON.
The device has
switched o
automatically, as
the activation button
5
was accidentally
pressed for longer
than 2 seconds.
First switch the device
to OFF using the ON/
OFF switch
2
and then
switch it on again as
usual.