Beurer BR 90 - Device Faults; Disposal; Repair and Device Disposal

39
Problem Possible cause Solution
The device does
not switch on, even
though the batteries
have been replaced
and the ON/OFF
switch
2
has been
set to ON.
The device may be
faulty.
Please contact Customer
Services.
Device outputs
5acoustic signals
and the illuminated
ring
4
flashes.
This indicates a
potential malfunction.
Switch the device o and
repeat the application
again after 10minutes.
Please contact Customer
Services if the fault
occurs again.
10. DISPOSAL
Repairing and disposing of the device
• Do not repair or adjust the device yourself. Proper operation can no
longer be guaranteed in this case.
• Do not open the device. Failure to comply with this instruction will void
the warranty.