24
9. What if there are problems?
Problem Potential solutions
There is no suction from the breast pump.
•
Check all parts of the breast pump are correctly
assembled.
•
Check whether the pump attachment is correctly
placed on the breast.
No breast milk is being pumped.
•
Check that the silicone tube is correctly inserted,
the suction level is not set to the minimum and the
breast pump is switched on.
•
Ensure that there is no milk remaining in the sili-
cone valve and obstructing the milk flow.
Pumping the breast milk is causing pain.
•
Try to relax and then attempt it again a few minutes
later. As you use the breast pump more and more,
you will find it easier to pump milk.
•
Reduce the suction level using the – button.
•
Consult your doctor.
The breast milk is leaking out underneath the sili-
cone cushion.
•
Remove the silicone cushion and re-attach it. En-
sure the silicone c ushion is correctly positioned
and firmly secured to the pump attachment.
•
Lean your upper body forwards slightly.
One of the breast pump components has become
altered or damaged.
•
Do not use any corrosive, gaseous cleaning agents
or solvents.
•
In some cases, marked fluctuations in tempera-
ture can damage the plastic on the breast pump.
•
If any of the parts becomes damaged, stop using
the breast pump.
The breast pump will not switch on.
•
Ensure that the breast pump is correctly assem-
bled and switched on.
•
Ensure that the mains part plug is correctly con-
nected to the breast pump.
9.1 Replacement parts and wearing parts
Item Item number
Pump attachment including silicone cushion (stand-
ard size), silicone membrane, silicone valve, silicone
tube, bottle and bottle cap
953.15
Bottle with teat and bottle cap 163.719
Adapter for Avent and NUK bottles 163.720
2 silicone cushions (small and standard) 163.721
Hand pump attachment including silicone cushion
(standard size)
163.722
Bottle stand 163.723
To Next Page
Loading...
