6
8. Care, Maintenance and Disposal
B
efore cleaning, remove the brush from the Power Head. Clean brushes thoroughly with clean running water
a
fter each use. Clean the Power Head with a soft, damp cloth. Do not use abrasive cleaners. Replace brushes
e
very 4-6 months or as needed. To reorder a replacement brush head, contact customer service.
Disposal
O
bserve the local regulations for material disposal. Dispose of the device in accordance with local
r
egulations. If you have any questions, please contact the local authorities responsible for waste disposal.
9. Replacement parts
P
lease contact Customer Service to obtain the following replacement parts.
Brush type Intended purpose Replace Item number
Cleansing attachment Daily cleansing After 4 months 164.077
Exfoliation attachment Gentle exfoliation in the
shower
After 4 months 164.078
10. Troubleshooting
Problem Solution
The device does not charge.
Ensure that the power adapter is connected to a functioning socket. If it is
connected correctly and the device still fails to charge, contact Customer
Services.
The device will not switch on.
Charge the device as described in these instructions for use. If it is still not
possible to switch on the device, contact Customer Services.
The device does not cleanse
as well as it did at the
beginning.
The brush is worn. Replace the brush head. Replacement heads can be
ordered from Customer Service.
11. Specifications
Power Adapter 100 - 240 VAC; 50/60 Hz; 0.2 A
Dimensions
With Brush: 2.8 x 3.9 x 3.9 in (7.2 x 10 x 10 cm)
Handle: 15.3 x 3.8 x 1.5 in (39 x 9.7 x 3.9 cm)
Weight
With Brush: approx. 9.5 oz (270 g)
Handle: approx. 4.9 oz (140 g)
Battery Capacity
Nominal Voltage
Type
800 mAh
3.7 Volts
Lithium-ion
12. FCC Compliance Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
N
OTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
To Next Page
Loading...
