EasyManua.ls Logo

Beurer HK 72 - User Manual

Beurer HK 72
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HK 72
ENGLISH
Portable Heat Wrap
Instructions for use .................................................2
ESPANOL
Banda térmica portátil
Manual de instrucciones ........................................9
FRANÇAIS
Enveloppe thermique portable
Mode d’emploi ......................................................16
Manufactured for / Manufacturado para / Fabriqué pour
Beurer North America LP
900 N Federal Highway, Suite 300
Hallandale Beach, FL 33009
www.beurer.com
READ THIS MANUAL COMPLETELY AND CAREFULLY BEFORE
USING THIS PRODUCT
Keep this manual in a safe location for future reference
LEA TODO ESTE MANUAL CON ATENCIÓN
ANTES DE USAR ESTE PRODUCTO
Conserve este manual en un lugar seguro para consultarlo en el futuro
LISEZ CE MODE D’EMPLOI COMPLÈTEMENT ET
ATTENTIVEMENT AVANT D’UTILISER CE PRODUIT
Conservez ce manuel en lieu sûr pour y faire référence ultérieurement
Questions or comments?
Call toll free 1-800-536-0366
or contact info@beurer.com

Table of Contents

Questions and Answers

  • D
    Derek WilsonAug 5, 2025
    What to do if none of the Temperature Settings LEDs light up on my Beurer Heater?
    • E
      Erica HuffAug 5, 2025
      If none of the Temperature Settings LEDs light up on your Beurer Heater when the Battery Pack is connected and the Power/Control Button is pressed, it could be due to a depleted Battery Pack. In this case, charge the Battery Pack. Alternatively, the Safety Shutoff Sensor might have been triggered due to overheating. Allow the heat wrap to cool down to room temperature before switching it on again.

Beurer HK 72 Specifications

General IconGeneral
Automatic switch-offYes
ThermostatYes
Overheat protectionYes
Tip-over protectionNo
WashingMachine washable

Related product manuals