22 23
5.
Set your desired temperature setting using the (+)
button [4] or the (-) button [5]. The current temper-
ature setting is shown on the LCD temperature
display [3]. The temperature can be permanently
set by pressing the ON/OFF button [6] twice. The
locked symbol
appears on the display.
We recommend the following temperature settings:
Note:
The curl styler has an automatic button lock
which switches on automatically after 30 sec
-
onds. You can only switch o the device if the
keylock is deactivated. To deactivate the keylock,
press the
ON/OFF button [6] twice again. The
locked symbol
goes out.
Temperature
setting
H
air type
100°C to 140°C
Fine, brittle, colour-
ed or bleached hair
140°C to 160°C
Normal hair
160°C to 200°C
Thick and resist-
ant hair
6. Separate your hair into individual sections with a
width of approx. two centimetres. Hold the sec
-
tions taut at the tips.
7. Carefully guide the hair between the two heating
rods [2]. Make sure that you leave enough space
between your hand and the heating rods [2].
To Next Page
Loading...
