14
Clean all parts that come into contact with water on a weekly basis. Let the device cool down for ap
-
prox. 60 minutes.
Completely remove the mist outlet, then remove the top in an upward direction.
•
Make sure that the ultrasonic membrane always remains free from limescale so as to ensure a long
service life. Always use the cleaning brush for this purpose and apply standard descaling agents. Leave
the descaling agent to work for as long as is required to dissolve all the limescale and dirt deposits. To
avoid damaging the ultrasonic membrane, never scrape with sharp, hard objects. Rinse out the base
if necessary.
•
Wipe the interior of the base with a cloth. Use a mild cleaning product. Rinse out the base if necessary.
•
Wipe the exterior housing of the base with a damp cloth.
•
Clean all removable parts, such as the bottle, bottle adapter, mist outlet and top, with a mild detergent
or vinegar/vinegar-based cleaner. Clean the parts thoroughly, particularly the bottle.
•
Bottle adapter, mist outlet and top are dishwasher-safe.
Dry the parts with a soft cloth and only reassemble them when they are completely dry.
For storage and easy transport, e.g. for travel, a storage pouch is available.
7. Technical Data
Size approx. 12 x 7.5 x 9 cm
Mains voltage / frequency 100 – 240 V / 50/60 Hz
Rated power 12 W
Ultrasonic frequency 1.7 MHz
Evaporation output max. 80 ml/h
Subject to errors and changes
To Previous Page
Loading...
