Need help?Do you have a question about the Beyblade DRIGER F and is the answer not in the manual?
Do not use Beyblade tops or Beystadium on tables or other elevated surfaces. Use on the floor.
Slide Metal Bearing onto Metal Axle. Snap both halves of Right Spin Gear around Metal Axle.
Place Metal Weight Gear on gear.
Peel and apply stickers as shown.
Snap both halves of Right Spin Gear around gear enclosing Metal Weight Gear.
Place Right Spin Gear into Blade Base.
Insert attachments into Blade Base until tips are just past knobs.
Place Weight Disk on Blade Base.
Place one Bit Chip on Attack Ring.
Place Attack Ring onto Blade Base, aligning tabs with grooves. Turn left to lock.
Snap attachments all the way into Blade Base to secure Right Spin Gear.
Your Beyblade top is now ready for battle!
Insert ripcord into launcher as shown.
Insert posts on launcher into openings in Beyblade top, as shown.
Hold lower half of launcher and rotate Beyblade top left to lock it in place.
Pull the ripcord over the Beystadium to launch your Beyblade.
Auto Clutch provides strong offense and endurance, kicking in at high speeds.
Removable Right Spin Gear is interchangeable for customizing battle strategies.
Auto Clutch activates in high-speed spin for offense and forceful stadium movement.
Auto Clutch switches off in low-speed spin for endurance and center stadium play.
Interchange parts with other Beyblade tops for different winning strategies.
Create Attack, Endurance, or Defense types by customizing parts.
Battle three Beyblade tops per player for triple the action and decide the play order.
To Next Page
General
