Beyerdynamic DT 250 - Maintenance; Cleaning and Care; Ear Pad Replacement; Models

EN
DT 25x / DT 28x / DT 29x 7
5. MAINTENANCE
As with any equipment which will be used near sensitive pas of
the body, it is essential that the ear pads, the headband and the
microphone pop-shield are kept clean.
f Use a damp cloth for cleaning the ear pads and headband
using only gentle cleansing agents (such as washing-up liquid).
Take care not to allow any water drops into the transducer
elements and do not use any solvent cleaners.
f The microphone pop-shield of the headsets can be easily
removed and washed in warm water. Please take care that the
pop shield is completely dry when it is replaced.
f The ear pads can wear out due to eects of skin moiure,
cosmetics and mechanical rains while wearing the head-
phones. From time to time, you will need to replace the ear
pads:
1. Remove the ear pad from the housing pa.
2. Put the new ear pad on the housing so that
the drop-in pins can lock in the corresponding holes.
3. Press the new ear pad with the thumbs of both hands
to the housing until you hear a clear “click” noise.
The modular design of the headphone allows easy servicing as all
pa can easily be exchanged.
6. MODELS
DT 250 Studio headphone, 80 Ω, black,
with WK 250.07 coiled cable,
plug-in type (ereo mini jack plug
with 1/4" adapter) ................... Order # 442.844
DT 250 Studio headphone, 250 Ω, black,
with WK 250.07 coiled cable,
plug-in type (ereo mini jack plug
with 1/4" adapter) ................... Order # 443.530
DT 252 Single-ear udio headphone, 80 Ω,
black, with WK 250.07 coiled cable,
plug-in type (ereo mini jack plug
with 1/4" adapter) ................... Order # 445.177
DT 280 MK II Single-ear headset, 200/80 Ω ....... Order # 701.599
DT 280 MK II Single-ear headset, 200/250 Ω ...... Order # 701.602
DT 290 MK II Headset, 200/80 Ω .................. Order # 701.610
DT 290 MK II Headset, 200/250 Ω ................. Order # 701.629
DT 297 PV MK II Headset, 80 Ω, condenser
microphone (cardioid),
for 12 - 48 V phantom power ........ Order # 701.467
DT 297 PV MK II same as above, but 250 Ω .......... Order # 721.042