Beyerdynamic DT 797 - Liability and Intended Use; Product Details; Description; Connection

EN
DT 797 — Headset 5
Liability / intended use
f Do not use the headphones for any application which is not
described in this product information.
f beyerdynamic GmbH & Co. KG accepts no liability for damage
to the headphones or injury to persons caused by careless,
improper or incorrect use of the headphones, or by use for
purposes not specified by the manufacturer.
2. DESCRIPTION
The closed DT 797 headset provides a good isolation from ambient
noise and is suitable for applications in very loud surroundings
such as conces or spos events. The poweul headphone
syem ensures a high reproduction precision and a balanced
sound characteriic. The andard impedance is 80 Ω. In order
to avoid damages, the cables in the headband and gooseneck
boom are covered. The connecting cable is fixed and single-sided.
The DT 797 headset provides a cardioid condenser microphone,
with a high gain-before-feedback and noise cancellation.
3. CONNECTION
Connect the headset to devices that are of good quality and
of the correct impedance and power ratings to get the be
peormance from them.
The DT 797 PV version comes with a 3-pin male XLR connector
and a 1/4" ereo jack plug (6.35 mm).
4. APPLICATION
The headband can be set to each head size via the adjuable
yokes. The pivoting gooseneck microphone allows wearing the
microphone from the le or right ear.
The microphone should be positioned to the side of the mouth
about 20 – 30 mm forward. This will keep it within the direct sound
path, but out of breath ream and therefore minimising any “pop”
sounds.