Need help?Do you have a question about the Beyerdynamic MMX 100 and is the answer not in the manual?
General| Impedance | 12 Ω |
|---|---|
| Magnet type | Neodymium |
| Ear coupling | Intraaural |
| Headphone frequency | 10 - 23000 Hz |
| Headphone sensitivity | 102 dB |
| Cable length | 1.2 m |
| Product color | Black, Silver |
| Connectivity technology | Wired |
Weight and Dimensions| Weight | 11 g |
|---|
High volumes and long listening times may cause hearing damage. Do not use if suffering from tinnitus.
Headphones reduce external sound perception, posing risks in traffic or near dangerous machinery.
Do not use the product for applications not described in this product information.
Contact qualified service personnel or the beyerdynamic Service- und Logistik Center via email.
Lists included accessories like cables for connecting to mobile devices and computers.
Find accessories and replacement equipment on the beyerdynamic website or visit the FAQ.
Clean the headset with a soft, moistened cloth. Avoid water and cleaning agents containing solvents.
Dispose of the product at a designated recycling point for electric and electronic appliances.
Shows how to connect the microphone to the headset, observing the jack's position.
Illustrates connecting the jack connector to the headset and how to disconnect cables.
Connects the 5-pole jack to the headset and the 4-pole jack to devices like consoles or notebooks.
Connects the 5-pole jack to the headset and two 3-pole jacks to PC headphone/microphone inputs.
Press the button to mute or unmute the microphone; the button sticks outward when muted.
Instructions on how to remove and attach ear pads by turning them counter-clockwise and clockwise.
Increase volume by turning the control wheel up; decrease by turning it down.
Details transducer type, operating principle, frequency response, impedance, and max sound pressure level.
Details transducer type, capsule diameter, polar pattern, frequency response, and signal-to-noise ratio.
To Next Page
