EasyManua.ls Logo

Beyerdynamic MMX 300 PRO - Warranty; Disposal; Service; Technical Specifications

Beyerdynamic MMX 300 PRO
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
EN
MMX 300 PRO — Gaming Headset
TECHNICAL SPECIFICATIONS
Headphone
Transducer type Dynamic
Operating principle Closed
Wearing type Over-ear
Frequency response 5 - 40,000 Hz
Nominal impedance 48 Ω per syem
Sound pressure level
@ 1 mW/500 Hz
96 dB
T.H.D. @ 500 Hz < 0.05 %
Power handling capacity 30 mW
Ambient noise
attenuation
18 dBA
Headband pressure 5.5 N
Weight 314 g
Length and type of cable 2.5 m / raight cable,
detachable, single-
sided with 5-pole ereo
jack plug
Connection 2 x mini ereo jack
plugs (3.5 mm) &
mini jack adapter
(3.5 mm) for consoles
Microphone
Transducer type Condenser
(back electret)
Operating principle
Pressure gradient
Polar pattern Cardioid
Power supply AB powering
Supply voltage 2 - 9 V
Current consumption 0.6 mA
Sensitivity at f = 1 kHz
21.6 mV/Pa
Frequency response 20 - 20,000 Hz
Max. sound pressure level 121 dB
Microphone output unbalanced
Length mic boom approx. 190 mm
Microphone head diameter 13 mm
(All specifications acc. to EN 60 268-7)
SERVICE
If you require service, please contact qualified
service personnel or directly:
beyerdynamic service and logiics centre
E-mail: service@beyerdynamic.de
Dismantling the MMX 300 PRO yourself will invalidate
the guarantee.
DISPOSAL
This symbol on the product, in the operating
inructions or on the packaging means that
electrical and electronic devices mu be
disposed of separately from household wae
at the end of their life cycle.
Always dispose of used equipment in
accordance with applicable regulations.
For sale within the EU only:
For the return of old equipment, there are free
collection points or a free return to beyerdynamic,
as well as other acceptance points for reuse. The
addresses are available at the local city or municipal
adminiration.
Dealers for electronic equipment are generally
obliged to take back wae electrical/electronic
equipment free of charge. This obligation also
applies to sales via remote communication.
For fuher information, please contact the local
authorities or the dealer from whom the product
was purchased.
WARRANTY
The company beyerdynamic GmbH & Co. KG oers
a limited warranty of 2 years on the purchased
beyerdynamic product. The exact warranty
conditions can be found on our website at
https://www.beyerdynamic.com/service/warranty

Table of Contents

Related product manuals