Orbis – Quick Start Guide
12
Thank you for selecting the Orbis conference system from beyerdynamic. Please take some time to
read carefully through this manual before setting up the equipment.
Please refer also to the extensive “Orbis Conference System” manual on the supplied data medium
or on the internet at www.beyerdynamic.com.
Please also refer to the supplied “Safety Information” booklet.
1. Controls, Indicators and Connections
1.1 Orbis CU Control Unit
Front View
Glass panel to display menu settings and status bar
Rotary encoder to select individual menus and to change settings
Corona
white = control unit active
flashing white = booting
red = control unit in standby mode
Slot for SD card
“REC” touch button for recording and other functions
To Next Page
Loading...
