Why does the microphone unit go off on my Beyerdynamic Conference System?
If the Beyerdynamic Conference System microphone unit goes off, first check the battery level. If the battery is empty, recharge it. Also, if the PIN code is activated, try deactivating it.
What to do if my Beyerdynamic Conference System microphone unit cannot be switched on?
If your Beyerdynamic Conference System microphone unit won't switch on, consider the following: * Ensure the control unit is switched on. * Check the number of open microphones (NOM) and increase it if possible. * Verify the battery has charge and recharge if empty. * Confirm the microphone unit is within range of the control unit; reduce the distance if needed.
Why is allocation not possible on my Beyerdynamic Conference System?
Allocation may be impossible on your Beyerdynamic Conference System for several reasons: * All channels might be occupied. Try switching off an activated microphone. * The number of open microphones (NOM) may be too low. Increase the NOM using the Quinta Conference Software or Quinta Web Server if possible. * The microphone unit could be out of range. Reduce the distance between the microphone and control units. * There might be interference from WLAN. Use the standard settings in the Quinta Conference Software manual. * The system might be in PC controlled mode. Set the system to autonomous operating mode using the Quinta Conference Software or Quinta Web Server.
How to fix interferences and noise in my Beyerdynamic Conference System?
To address interferences and noise in your Beyerdynamic Conference System: * Reduce the input level of the control unit. * Ensure the microphone unit is within the range of the control unit. * Remove any obstacles between the microphone unit and antenna.
What to do if my Beyerdynamic Conference System microphone unit goes off?
If your Beyerdynamic Conference System microphone unit turns off unexpectedly: * Check the battery level and recharge if necessary. * If a PIN code is activated, try deactivating it.
Why is the headphone output not working on my Beyerdynamic Conference System microphone unit?
If the headphone output on your Beyerdynamic Conference System microphone unit isn't working: * Ensure the microphone unit is switched on. * Check that the headphone or recorder is properly connected. * Increase the volume using the Quinta Conference Software or Quinta Web Server.
How to resolve short drop-outs on Beyerdynamic Conference System?
To resolve short drop-outs in your Beyerdynamic Conference System, the suggested solution is to select another frequency band using the Quinta Conference Software, Quinta Web Server, or the push-button for RF frequency band selection on the front of the Quinta CU control unit.
How to troubleshoot loudspeaker if it does not work on Beyerdynamic Conference System microphone unit?
If there's no sound from the loudspeaker of your Beyerdynamic Conference System microphone unit, check the volume setting using the Quinta Conference Software or Web Server. If the volume is low, increase it using the Quinta Conference Software or Quinta Web Server.
How to fix interferences and noise in Beyerdynamic Quinta Conference System?
If you're experiencing interference or noise with your Beyerdynamic Conference System, start by checking the audio level and reducing the input level of the control unit. Also, ensure the microphone unit is within the range of the control unit by reducing the distance between them. Finally, check the line of sight between the microphone unit and antenna, removing any obstacles that might be present and ensuring nothing is placed in front of the control unit's antennae.
How do I stop feedback on my Beyerdynamic Conference System?
To stop feedback, correct the volume and position of the external loudspeakers.
Safety instructions for the Quinta CU Control Unit and Charger, covering setup, usage, and precautions.
Safety instructions for the Quinta MU Microphone Unit, including setup, usage, charging, and risk of injury.
Safety instructions for the Quinta TH Handheld Transmitter, covering usage, battery handling, and charging.
Instructions and warnings for proper disposal of old batteries and electronic equipment.
Details on the front and rear controls and indicators of the Quinta CU Control Unit.
Guidelines for optimal placement of the Quinta CU Control Unit for effective radio transmission and avoiding interference.
Instructions for connecting antennae directly or remotely to the Quinta CU Control Unit.
Information on connecting audio sources, networks (AVB), and external speakers to the Quinta CU Control Unit.
Details regarding the power supply requirements and connection for the Quinta CU Control Unit.
Instructions for connecting PCs, media control systems, or smartphones to the Quinta CU Control Unit for configuration.
Procedure for powering the Quinta CU Control Unit on/off, including status indicators and frequency band selection.
Guidelines for mounting the Quinta CU Control Unit into a 19-inch rack, including ventilation and access.
Overview of main menu navigation and access to settings on the Quinta CU Control Unit.
Steps to adjust the master volume level of the Quinta CU Control Unit via the main menu.
Instructions for using Room Combining to operate or combine multiple Quinta systems in different rooms.
How to access and view Ethernet connection information on the Quinta CU Control Unit.
Accessing and reading AVB connection information from the Quinta CU Control Unit.
Using the RF-Analyzer to assess frequency usage and select optimal bands for wireless communication.
Displaying firmware versions for different components of the Quinta CU Control Unit.
Overview of controls and indicators on the Quinta MU microphone units (MU 23/22/21 and MU 33/31).
Instructions for connecting gooseneck microphones to the Quinta MU 21/22/23 microphone units.
Procedure for switching Quinta MU microphone units on and off, including standby function.
Information on battery life, operating time, and charging status display for Quinta MU microphone units.
Details on powering Quinta MU microphone units using the external CA 2459 mains power adapter.
Explanation of operating modes for Quinta MU microphone units: Normal, FiFo, Push-To-Talk, Voice Activation.
Cleaning and maintenance procedures for Quinta MU microphone units and their components.
How to use the Quinta Conference software to set a security code for enhanced system safety.
Configuration options for the chairman microphone's function button: Normal, Mute, Clear, and Priority.
Using the Request-to-Talk mode with PC or media control system for managing microphone requests.
Step-by-step guide for charging Quinta microphone units using the CD 2 or CD 3 chargers.
Important notes on battery capacity, charging cycles, and maintenance for rechargeable batteries.
Identification of controls and indicators on the Quinta TH Handheld Transmitter.
Instructions for attaching and detaching microphone heads to the Quinta TH Handheld Transmitter.
Step-by-step guide for inserting NiMH or alkaline batteries into the Quinta TH Handheld Transmitter.
Procedure for switching the Quinta TH Handheld Transmitter on and off, including automatic shut-off.
Explanation of operating modes for the Quinta TH Handheld Transmitter: Normal, FiFo, Push-To-Talk, Voice Activation, Request-to-Speak.
Guidelines for maintaining and cleaning the Quinta TH Handheld Transmitter and its microphone heads.
Instructions for charging the Quinta TH Handheld Transmitter using the WA-CD charger.
Guidance on operating Quinta system with WLAN/WiFi, including frequency compatibility and installation tips.
Explanation of physical laws affecting interference-free operation of wireless devices on the same frequency bands.
Information on potential interferences between Quinta system and Bluetooth devices due to frequency hopping.
Configuration example for simultaneous operation of Quinta, media control system, and WLAN using specific frequency channels.
General technical specifications for the Quinta system, including frequency range, modulation, and power.
Technical specifications for the AVB interface, including audio data format and stream ID.
Detailed technical specifications for Quinta MU 23/22/21 microphone units, including transmitter power, battery, and dimensions.
Detailed technical specifications for Quinta MU 33/31 microphone units, including transmitter power, battery, and loudspeaker.
Technical specifications for the Quinta TH Handheld Transmitter, covering frequency, modulation, and battery.
Detailed technical specifications for the Quinta CU Control Unit, including frequency response, connections, and power supply.
Technical specifications for the Quinta CD 2/CD 3 Chargers, including power, temperature, and dimensions.
Technical specifications for the CA 2459 Mains Power Adapter, including voltage and connector type.
Specific instructions for operating devices in Japan, particularly regarding 5.8GHz range and antenna usage.
General| Speech Intelligibility | High |
|---|---|
| Encryption | 128-bit encryption |
| Operating Time | Up to 20 hours |
| Power Source | Rechargeable battery |
| Battery Life | Up to 20 hours |
| Directivity | Cardioid |
To Next Page
