Beyerdynamic Quinta User Manual (English)

Other manuals for Beyerdynamic Quinta

Operating Instructions46 pages

Update Instructions25 pages

Questions and Answers:

M
Michael WelchAug 21, 2025
Why is the microphone button flashing red rapidly on my Beyerdynamic Conference System?
- P
  Patricia StricklandAug 21, 2025
  The microphone button flashes red rapidly due to several potential issues: * The control unit might not be switched on. Ensure the control unit is powered on. * The microphone unit may be out of range of the control unit. Try reducing the distance between the units. * The frequency bands may be configured incorrectly. Check the frequency bands using the Quinta Conference software. * The microphone unit might have an incorrect PIN code. Deactivate the PIN function in the Quinta Conference software, ensure all microphone units are within range, enter the PIN code in the software and select 'Send to MUs', then reactivate the PIN function.
S
stevenjonesAug 23, 2025
What to do if my Beyerdynamic Conference System microphone unit cannot be switched on?
- T
  Tamara MartinAug 23, 2025
  If your Beyerdynamic Conference System microphone unit won't switch on, consider the following: * Ensure the control unit is switched on. * Check the number of open microphones (NOM) and increase it if possible. * Verify the battery has charge and recharge if empty. * Confirm the microphone unit is within range of the control unit; reduce the distance if needed.
A
Amy SaundersAug 25, 2025
Why is allocation not possible on my Beyerdynamic Conference System?
- P
  Paula WalkerAug 25, 2025
  Allocation may be impossible on your Beyerdynamic Conference System for several reasons: * All channels might be occupied. Try switching off an activated microphone. * The number of open microphones (NOM) may be too low. Increase the NOM using the Quinta Conference Software or Quinta Web Server if possible. * The microphone unit could be out of range. Reduce the distance between the microphone and control units. * There might be interference from WLAN. Use the standard settings in the Quinta Conference Software manual. * The system might be in PC controlled mode. Set the system to autonomous operating mode using the Quinta Conference Software or Quinta Web Server.
S
Sandra ThompsonAug 26, 2025
How to fix interferences and noise in my Beyerdynamic Conference System?
- C
  Carrie MunozAug 27, 2025
  To address interferences and noise in your Beyerdynamic Conference System: * Reduce the input level of the control unit. * Ensure the microphone unit is within the range of the control unit. * Remove any obstacles between the microphone unit and antenna.
M
Marcus ScottAug 27, 2025
What to do if my Beyerdynamic Conference System microphone unit goes off?
- J
  Jennifer CarrollAug 27, 2025
  If your Beyerdynamic Conference System microphone unit turns off unexpectedly: * Check the battery level and recharge if necessary. * If a PIN code is activated, try deactivating it.
S
Samuel StoneAug 29, 2025
Why is the headphone output not working on my Beyerdynamic Conference System microphone unit?
- B
  Brian LarsonAug 29, 2025
  If the headphone output on your Beyerdynamic Conference System microphone unit isn't working: * Ensure the microphone unit is switched on. * Check that the headphone or recorder is properly connected. * Increase the volume using the Quinta Conference Software or Quinta Web Server.
K
Kara BrockAug 30, 2025
What to do if the loudspeaker of my Beyerdynamic Conference System microphone unit does not work?
- K
  kirbycoryAug 31, 2025
  If the loudspeaker of the microphone unit doesn't work, increase the volume with the Quinta Conference Software or Quinta Web Server.
S
Stephen MillerSep 1, 2025
Why is the operating control LED flashing on my Beyerdynamic Conference System?
- E
  Erica HowardSep 1, 2025
  If the operating control LED is flashing, it indicates that the battery is almost empty. Recharge the battery inside the microphone unit.
M
Mikayla Howe MDSep 2, 2025
How to resolve short drop-outs in my Beyerdynamic Conference System?
- J
  Jose WellsSep 3, 2025
  To resolve short drop-outs, select another frequency band with the Quinta Conference Software, Quinta Web Server or via the push-button for RF frequency band selection on the front of the Quinta CU control unit.
K
kharrisSep 4, 2025
How do I stop feedback on my Beyerdynamic Conference System?
- S
  Susan WilliamsSep 4, 2025
  To stop feedback, correct the volume and position of the external loudspeakers.

Beyerdynamic Quinta Specifications

General

Speech Intelligibility	High
Encryption	128-bit encryption
Operating Time	Up to 20 hours
Power Source	Rechargeable battery
Battery Life	Up to 20 hours
Directivity	Cardioid