What to do if the Beyerdynamic Headphone Xelento wireless playback is too quiet?
If the playback volume on your Beyerdynamic Xelento wireless Headphone is too quiet, even when set to maximum, it may be because the transmitted audio signal is too quiet. To resolve this, set the playback volume to maximum on the player.
How to fix Beyerdynamic Headphone Xelento wireless that will not switch on?
If your Beyerdynamic Xelento wireless Headphone will not switch on, it is likely that the battery is empty or does not have much charge. Charge the battery to resolve this issue.
Why my Beyerdynamic Headphone Xelento wireless does not appear in available Bluetooth devices?
If your Beyerdynamic Xelento wireless Headphone is not appearing in the available Bluetooth devices on your player, try the following: * Switch the Xelento wireless on. * Set the Xelento wireless to pairing mode. * Disconnect any other devices and pair the Xelento wireless with your preferred device.
Why does my Beyerdynamic Headphone Xelento wireless sound harsh and has poor bass?
If the sound from your Beyerdynamic Xelento wireless Headphone is harsh and the bass reproduction is too poor, the seal of the eartips may not be sufficient. Select suitable eartips on the left and right sides until the sound is ideal.
What to do if no audio is being played on Beyerdynamic Headphone Xelento wireless?
If no audio is being played on your Beyerdynamic Xelento wireless Headphone, it might be because there is no Bluetooth connection. Pair the Xelento wireless with the player to establish a connection.
General| Type | In-ear |
|---|---|
| Driver Type | Dynamic |
| Impedance | 16 ohms |
| Battery Life | Up to 8 hours |
| Bluetooth | Yes |
| Bluetooth Codec | aptX, aptX HD, AAC, SBC |
| Connector | 3.5 mm (wired), USB-C (charging) |
| Connectivity | Wireless (Bluetooth), Wired |
| Frequency Response | 8 Hz - 48, 000 Hz |
| Charging Time | 1.5 hours |
| Sensitivity | 110 dB SPL (1 mW / 500 Hz) |
To Next Page
