What to do if the playback volume is low on Beyerdynamic Wireless Headphones?
If the playback volume is low even when your Beyerdynamic Wireless Headphones volume is at its maximum, the audio signal you're receiving might be too quiet. Try increasing the playback volume on the device you're using to listen.
Why Beyerdynamic Wireless Headphones don't appear on available Bluetooth devices?
If your Beyerdynamic Wireless Headphones aren't appearing in the list of available Bluetooth devices, there could be a few reasons: * The headphones might be switched off. Ensure they are turned on. * They might not be in pairing mode. Activate pairing mode on your headphones. * They might already be connected to another device. Disconnect them from any other device and then try connecting to your desired device.
What to do if the wireless range is too low on Beyerdynamic Wireless Headphones?
If you're experiencing a disrupted connection or low wireless range with your Beyerdynamic Wireless Headphones, it might be due to interference from other devices. Try moving away from WLAN routers and microwave ovens. Also, make sure your body isn't positioned between the playback device and the headphones.
General| Battery type | Built-in battery |
|---|---|
| Charging source | USB |
| Battery capacity | 1050 mAh |
| Rechargeable battery | Yes |
| Battery recharge time | 2 h |
| Number of batteries supported | 1 |
| Continuous audio playback time | 30 h |
| Impedance | 32 Ω |
| Driver type | Dynamic |
| Ear coupling | Circumaural |
| Headphone frequency | 5 - 40000 Hz |
| Maximum input power | 200 mW |
| Total Harmonic Distortion (THD) | 0.05 % |
| Cable length | 1.2 m |
| Product color | Black, Silver |
| Wearing style | Head-band |
| Sound pressure level (max) | 100 dB |
| Operating temperature (T-T) | 0 - 40 °C |
| Frequency band | 2.4 - 2.4835 GHz |
| Wireless range | 10 m |
| 6.35 mm connector | No |
| Bluetooth version | 4.2 |
| Bluetooth profiles | A2DP, AVRCP, GAVDP, HFP, HSP |
| Connectivity technology | Wired & Wireless |
| Audio adapters included | 3.5 mm |
Weight and Dimensions| Weight | 380 g |
|---|
Headphones reduce perception of external sounds, making use in road traffic dangerous.
Avoid sudden movements with wired headphones to prevent self-injury due to snagging.
Instructions on how to power the Amiron wireless headphones on and off using the button.
Steps to pair the headphones with a Bluetooth enabled device.
Controls for media playback such as start/stop and next track using the touch pad.
Swipe finger forward on the touch pad to play the next track.
Swipe finger backward on the touch pad to play the previous track.
Swipe finger forward and hold on touch pad for at least one second for fast forward.
Swipe finger backward and hold on touch pad for at least one second for rewind.
Swipe finger upwards on the touch pad to increase volume until maximum is achieved.
Swipe finger downwards on the touch pad to decrease volume until minimum is achieved.
Functions for managing calls, including accepting/ending and rejecting.
Instructions for charging the Amiron wireless headphones using the USB cable.
Procedure to reset the Amiron wireless headphones to their original factory settings.
To Next Page
