Beyerdynamic AMIRON WIRELESS - System Settings and Operations; Reset to Factory Settings

Amiron wireless – Headphones
14
Touch pad and button functions table
Unless otherwise stated, the listed functions apply for headphones that are switched
on.
Switch on
Press button 3 for 2 seconds
Switch off
Press button 3 for 6 seconds
Paring mode Switch off headphones, then press
button 3 for 6 seconds
Delete pairing mode list Switch off headphones, then press
button 3 for at least 10 seconds
Start / pause
Briefly tap the touch pad 1 twice
Next track
Drag forwards on the touch pad 1
Previous track
Drag backwards on the touch pad 1
Scroll forward
Drag forwards on the touch pad 1 and
hold for at least 1 second
Scroll backward
Drag backwards on the touch pad 1
and hold for at least 1 second
Accept / finish a call
Briefly tap the touch pad 1 twice
Reject a call
Press the touch pad 1 for 2 seconds
Toggle between 2 callers
Press the touch pad 1 for 2 seconds
Call personal assistant (Siri, Google
Assistant etc.)
Press the touch pad 1 for 2 seconds
Reset to factory settings
• Switch on the Amiron wireless.
Then perform the following steps within two seconds:
– Hold button 3.
– Drag one finger backwards on the touch pad 1.
– Release button 3.