english
Amiron wireless – Headphones
17
Troubleshooting
Problem Cause Solution
Amiron wireless cannot be
switched on
Battery is empty or al-
most empty
Charge the battery
No audio output No Bluetooth connection Pair the Amiron wireless
with the playback device
The Amiron wireless does
not appear among the
available Bluetooth de-
vices on the playback
device
• The Amiron wireless is
switched off
• The Amiron wireless is
not in pairing mode
• A Bluetooth connection
to another playback de-
vice exists already
• Turn on the Amiron wire-
less
• Put the Amiron wireless
into pairing mode
• Disconnect the Blue-
tooth connection to the
other playback device
and connect the Amiron
wireless to the desired
device
Playback volume is low,
despite the Amiron wire-
less volume is set to
maximum
The received audio signal
is too low
Increase the playback vol-
ume on the playback
device
The sound is harsh and
the bass response is too
low
Insufficient seal of the
ear pads
Adjust the Amiron wireless
over your ears so that
maximum seal is achieved
The wireless range is too
low or the connection is
disrupted
There are interferences
with other devices
Move away from WLAN
routers and microwave
ovens, ensure that your
body is not between
playback device and the
Amiron wireless
To Next Page
Loading...
