3 - MACHINE DESCRIPTION
3.1 Description of working Cycle
Water coming from the tank at the back of the machine is sent to the boiler by a vibration pump
controlled by a switch on the front panel. Water is heated by an electrical resistance and temperature
is regulated and kept constant by contact thermostats located at the top of the boiler. Water passes
through a valve, crossing a boiler filter to the infusion area. Hot water or steam can be directly with-
drawn from the boiler through the faucet.
3.2 Description of controls (Fig. 01- Fig. 02)
1 Water/Steam tap
2 Filter-holder
3 Water/Steam nozzle
4 Gauge
5 Cup holder grid
6 Drain tray
7 Tank
8 Water reservoir lid
9 Coffee delivery switch
10 Steam output switch
11 Red light
12 Coffee delivery spout
13 Green light
14 Main Switch
15 Orange light
16 Filter holder with capsule filter (optional)
17 Filter holder with pod filter (optional)
18 Filter holder with ground coffee filter
19 Press
20 Dose measurer
21/1 Filter 1 cup
21/2 Filter 2 cups
3.3 Technical data (Fig. 03)
Power Supply V~/Hz 220 – 240V~ / 50-60Hz 110 – 120V~ / 50-60Hz
Nominal power W 1450 - 1750 1300 - 1400
Resistance W 1350 - 1650 1200 - 1300
Boiler lt 0,5
Tank lt 3
Width “A” mm 250
Depth “B” mm 425
Height “C” mm 375
Net Weight kg 17
Gross Weight kg 20
To Next Page
Loading...
