Why is the coffee flow too high on my Bezzera Coffee Maker?
If the coffee is dispensed too quickly and the crema is lighter than usual, adjust the coffee grinding and/or dosage. If the pump pressure is too high (over 10 bar), a technician is required.
Why is the coffee flow weak on my Bezzera Victoria?
If the coffee is dispensed drop by drop, the dispensing time is too long, and the coffee quality is poor with a dark crema, adjust the grinding and/or dosage. If the group shower is clogged or the filter in the filter holder is clogged, a technician may be needed, or the filter should be cleaned or replaced.
How to fix cold coffee from my Bezzera Victoria?
If the coffee is too cold, try these solutions: use a cup warmer if the cups are cold, keep the filter holder mounted on the group if the filter holders are cold, or adjust the coffee grind if it's too fine. If the machine's water circuit is dirty or the group is cold, contact a technician.
Why is it hard to position the filter holder on my Bezzera Coffee Maker?
If the filter holder is difficult to position on the attachment ring, it may be due to too much coffee in the filter holder. Reduce the amount of coffee in the filter holder.
Why is my Bezzera Victoria Coffee Maker leaking from the filter holder?
If you notice leaks from the filter holder, clean the under-cup gasket with the supplied brush if it is worn or encrusted. If the filter holder is poorly positioned on the group, and the issue persists, contact a specialized technician.
How to fix no steam from the Bezzera Victoria Coffee Maker steam tube?
If the steam is not coming out of the steam tube, the nozzle of the steam tube may be clogged. Unclog it with a pin.
Why is the filter holder positioned abnormally on my Bezzera Victoria Coffee Maker?
If the filter holder is abnormally positioned once placed on the group, the under-cup gasket is worn. Contact a specialized technician to replace the under-cup gasket.
Why is there coffee deposit at the bottom of my Bezzera Victoria Coffee Maker cup?
If coffee grounds are appearing at the bottom of your cup, it could be due to a few reasons. First, the coffee might be ground too finely, in which case you should adjust the grinder. Second, the filter holder could be dirty inside, or the filter itself might be damaged, requiring cleaning or replacement. Finally, the grinder burrs could be worn, and you would need a technician to assist.
Presentation of safety symbols and their meanings.
Key warnings for safe operation and handling of the machine.
Diagram and color codes for electrical power supply connections.
Details on warranty coverage period and required documentation.
List of defects and conditions explicitly excluded from warranty coverage.
Critical safety guidelines for machine operation and user safety.
Instructions for safe packing, storage, and movement of the machine.
Defines the proper and intended applications for the espresso machine.
Explanation of the operating cycle and identification of controls.
Key performance metrics and dimensions of the machine.
Safety warnings and preparation steps for machine installation.
Guide to connecting the machine to power, water, and drainage.
Instructions for connecting and utilizing a water softener.
Explanation of grounding for electrical safety compliance.
Procedure for initial startup and filling the machine's boilers with water.
Steps for heating the machine and preparing coffee.
Using steam/hot water functions and safely turning off the machine.
Accessing and adjusting group settings like enabling and temperature.
Procedures for group cleaning and monitoring dose counters.
Viewing and creating custom brewing profiles.
Steps to create and customize espresso brewing profiles.
Steps to create and customize DRIP coffee brewing profiles.
Creating TEA profiles and assigning them to dosing keys.
Procedure for dispensing coffee directly into a pot or tall cup.
Dosing DRIP coffee and adjusting service boiler temperature/pressure.
Activating boiler rinsing and draining functions for maintenance.
Selecting language and adjusting LED lighting options.
Setting up alarms for timely machine maintenance.
Managing water filter, viewing alarms, and setting system clock.
Configuring dose profiles, temperature units, and audible alerts.
Viewing operational counters and scheduling automatic power cycles.
Setting password, checking pressure, and technician-level programming.
Essential safety precautions for performing maintenance tasks.
Detailed instructions for cleaning the machine after use and daily.
Procedure for resetting the safety thermostat and proper product disposal.
Resolving issues with no steam output or filter holder leaks.
Addressing filter holder insertion difficulties and scarce coffee flow.
Diagnosing and fixing problems with coffee dispensing too quickly or slowly.
Resolving issues with coffee dispensing being too cold or too hot.
Steps for resolving machine blockages and no coffee dispensing.
Addressing coffee deposits and problems with grinding discs.
General| Type | Espresso Machine |
|---|---|
| Manufacturer | Bezzera |
| Pump Type | Vibratory Pump |
| Boiler Type | Single Boiler |
| Boiler Material | Copper |
| Group Head | E61 |
| Material | Stainless Steel |
| Steam Wand | Yes |
| Hot Water Dispenser | Yes |
| Portafilter Size | 58 mm |
| Pump Pressure | 15 bar |
| Automation | Semi-Automatic |
| Boiler Capacity | 0.5 liters |
| Water Tank Capacity | 2.5 L |
| Voltage | 220-240 V |
| Height | 42 cm |
To Next Page
