BFI Automation CFC 200 IR3 - User Manual

1
COMPACT FLAME CONTROLLER
CFC 200
(Formerly 8.XX)
TECHNICAL DESCRIPTION
EDITION: TB CFC200-REV3-2015-04-07
IMPORTANT:
Please note, that all mounting and wiring as well as all changing or adjustment at
the flame monitoring and evaluation equipment should only be carried out by fully
trained and authorized personnel.
BFI Automation is pleased to support you if you do not have any experience with
the equipment. Our service personnel is carrying out world wide installations, su-
pervision and commissioning and is available upon request.
For the stage of planning you can ask our sales and project engineers for any
support you may need.
BFI Automation is providing any kind of training for your engineers.
PLEASE READ THIS LEAFLET CREFULLY AS IT CONTAINS NECESSARYIN-
FORMATION FOR THE USE OF THIS EQUIPMENT. FOR MORE DETAILED IN-
FORMATION PLEASE REFER TO THE OPERATING AND MAINTENANCE MA-
NUAL.
BFI – Automation Mindermann GmbH, Eggerscheidter Str. 57, D-40883 Ratingen
Phone +49 (0) 2102 96 82 – 0, Fax +49 (0) 2102 9682 – 42
EMail : info@bfi-automation.de

BFI Automation CFC 200 IR3 Specifications

General

Brand	BFI Automation
Model	CFC 200 IR3
Category	Controller
Language	English

Summary

Technical Description

Function

Flame Radiation Analysis

Integral method for flame radiation analysis, signal processing, dynamic monitoring.

Sensitivity Adjustment

Output Current Selection

Assembly Requirements

Installation and Connection

Installation Notes

Pin configuration, power supply, shunt resistance, and safety warning.

Connection Diagram

Table and diagram detailing pin assignments and cable colors.

Housing Options

Standard Housing

Housing for general use, suitable for hazardous area Zone 2.

OE-Converter Housing

Housing for OE-Converter, suitable for hazardous areas Zone 2.

Hazardous Area Housings

Ex-proofed Housing

Housing for Zone I, with specific ATEX certifications for dust and gas.

Explosion Proof Housing for OE-Converter

Housing for OE-Converter in Zone I, with specific ATEX certifications.

Accessories and Technical Data

Available Accessories

List of optional accessories like power supply, mounts, and adapters.

Technical Specifications

Details on spectral sensitivity, voltage, current, temperature, output, and response times.

Electrical Connection Types

Different connector types for standard and explosion-proof housings.

Dimensional Data

Dimensions for various housing configurations with and without brackets.

Safety and Compliance

Class of Protection

IP ratings and ATEX zone classifications for different housings.

Weight Information

Weight specifications for each housing type.