technology for your future
Automation
BFI
!
CAUTION
CAUTION: All alignments and or adjustments must always be applied
if new repair parts were installed, the flame scanner was moved or
the flame picture was modified (e.g. through additional combustibles,
new torches, changes to the torches / air registers), as well as all ini-
tial installations.
heating
insulator
optical
adjustment
ball flange
sight tube
mounting flange
flame scanner
adjustment angle
30° max
how to adjust in the right way
right wrong
░
30°
░
30°
primary air
fuel
flame root combustion area
changing of frequency and amplitude in
relationship to the distance of the flame root
To Next Page
Loading...
