What to do if BFT LUX 2B not opening during power cut?
In case of a power cut, you can manually release the BFT Gate Opener by inserting the key 'C' (used to adjust the bypass valve) into the triangular pivot 'P' under the actuator and turning it anti-clockwise.
What to do if BFT LUX 2B Gate Opener not restoring to electrical operation after manual opening?
To restore the BFT Gate Opener to electrical operation after manual opening, turn the key clockwise until pivot 'P' is locked.
What to do if I notice malfunctions in BFT LUX 2B automation?
Any malfunction in BFT Gate Opener automation should be corrected immediately by a qualified specialist.
Why does the BFT LUX 2B actuator stop, even though it does not have electric limit switches?
The motors stop when the working time set in the control unit has expired. To resolve this, increase the set time by 2-5 seconds with respect to the time in which the leaves reach the ground gate stops.
General| Brand | BFT |
|---|---|
| Model | LUX 2B |
| Category | Gate Opener |
| Language | English |
To Next Page
