BFT Maxima Ultra 36 - 2.4 Bar Installation; 2.5 Bar Alignment

- 12 -
ENGLISH
Use the "START" command to bring
the bar to vertical position
Opening micros-
witch cam
Check that the bar is in
vertical position
ADJUST THE BAR VERTICALLY OPERATING
THE CAM OF THE OPENING LIMIT SWITCH.
Electrically connect the con-
trol unit (see CSB-Xtreme
instructions)
TO ALIGN THE BAR WITH THE ROAD
PAVING, OPERATE THE ADJUSTABLE BAR
HOLDER.
Use the "Start" command to bring
the bar in horizontal position
Check that the bar is in horizontal
position
2.4 BAR INSTALLATION
2.5 BAR ALIGNMENT
2 x 10 mm
Adjustable bar holder
M6x20
4.2x16
Ø14
Ø6x12
M5x8
Ø6
M14x70
Ø5
M14
Ø6
Ø14
M6
 Installation is mandatory in XL con guration (supplied).
For STD version, it is optional (not supplied).
HYPHEN PS 
2. Installation
EN
BOOM PS