18
LUNA2-manual-EN-1-4 June 2019
6. Storage and Servicing
Servicing / Inspection
It is important to have your glider regularly serviced. Your BGD wing should have a thorough check / inspection every
24 months or every 150 ight hours, whichever occurs rst. This check must be made by the manufacturer, importer,
distributor or other authorised persons.
Please print out the service pages from this manual, ll in the number of ights and hours own in the Service Record,
and send together with your glider when it goes for inspection or servicing. The manufacturer will only accept
responsibility for paraglider lines and repairs which we have produced and tted or repaired ourselves.
Environmental protection and recycling
Our sport takes place in the natural environment, and we should do everything to preserve our environment. A glider
is basically made of nylon, synthetic bres and metal. At the end of your paraglider’s life span, please remove all metal
parts and put the different materials in an appropriate waste/recycling plant.
To Next Page
Loading...