24
LUNA2-manual-EN-1-4 June 2019
Line length checks
7. Technical data
8. Technical data
All measures are in mm, with 50N line tension, this tension being slowly and gradually applied before taking the
measurement.
The lengths are measured from the lower surface of the canopy and include the risers and maillons.
During the EN certication process, the test team has checked the lengths of the suspension lines, control lines and
risers given in the manual against the sample glider, after the test ights have been carried out. The difference in
length between the manual and the sample may be no more than 10mm.
To Next Page
Loading...